- Inspect the outer race and input shaft for the following:
 
| •  | Worn or damaged splines | 
 
| •  | Scoring inside the diameter of the race | 
 
- Inspect the sprag elements for flat spots.
 
- Inspect the cage for distortion or broken ribbon tabs.
 
- Inspect the inner bearing for cracks.
 
- Install the inner roller bearing (456).
 
- Install the new inner race thrust ring (455).
 
- Install the outer race washer (458) onto the outer race (459).
 
- Install the retaining rings (460) and the forward clutch sprag (461) onto the outer race (459).
 
- Install the sprag assembly (460, 461, 459) onto the sun gear shaft (457).
 
- Check that the forward clutch sprag rotation freewheels and locks up in the correct
direction.
 
- Install the input sun gear shaft (8) into the case.