|
Important: Twisted-pair wires provide an effective shield that helps protect sensitive
electronic components from electrical interference. Depending on application,
twisted-pair wires are used on wiring harnesses connecting the following
components:
| • | The electronic ignition control module |
| • | The manifold absolute pressure (MAP) sensor |
| • | The powertrain control module (PCM) |
| • | The vehicle speed sensor (VSS) |
| • | The wires must be twisted a minimum of 9 turns per 30.5 cm
(12 in) as measured anywhere along the length of the wires. |
| • | The outside diameter of the twisted wires must not exceed 6.0 mm
(0.236 in). |
Refer to
Splicing Twisted or Shielded Cable
in Wiring Systems.
| 
