Removal Procedure
- Remove the cover from
 the rear seat shoulder belt.
 
- Remove the bolt retaining the rear seat shoulder belt to the bracket.
 
- Remove the rear seat shoulder belt bracket cover.
 
- Remove the nut retaining the rear seat shoulder belt bracket to
 the reinforcement.
 
- Remove the headliner.
 Refer to 
Headlining Trim Panel Replacement 
   
 in Interior Trim.
 
- Remove the nuts retaining the rear seat shoulder belt reinforcement
 to the roof.
 
- Remove the bolts retaining the rear seat shoulder belt reinforcement
 to the roof.
 
- Remove the rear seat shoulder belt reinforcement from the roof.
 
Installation Procedure
- Install the rear seat
 shoulder belt reinforcement to the roof.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolts  to retain the rear seat shoulder belt reinforcement
to the roof.
 
Tighten
Tighten the rear seat shoulder belt reinforcement bolts to the roof
 35 N·m (26 lb ft).
- Install the nuts to retain the rear seat shoulder belt reinforcement
 to the roof.
 
Tighten
Tighten the rear seat shoulder belt reinforcement nuts to the roof to
 35 N·m (26 lb ft).
- Install the headliner. Refer to 
Headlining Trim Panel Replacement 
  in Interior Trim.
 
- Install the nut to retain
 the rear seat shoulder belt bracket to the reinforcement.
 
Tighten
Tighten the seat shoulder belt bracket to the reinforcement nut to 35 N·m
 (26 lb ft).
- Install the rear seat shoulder belt bracket cover.
 
- Install the bolt to retain the rear seat shoulder belt to the
 bracket.
 
Tighten
Tighten the seat shoulder belt bracket to the reinforcement bolt to
 30 N·m (22 lb ft).
- Install the cover to the rear seat shoulder belt bolt.