Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the swing-out window latch from the door, if equipped. Refer to Swing Out Window Replacement .
2. Remove the door handle bezel screws.
3. Remove the door handle bezel.



4. Use J 38778 in order to release the molding retainers.

1. Install the door garnish molding to the vehicle:

1.1.	Align the retainers to the holes in the door.

1.2.	Press the panel in order to engage the retainers into the door.

2. Install the door handle bezel to the door.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the door handle bezel screws.

Tighten
Tighten the door handle bezel screws to 2 N·m (18 lb in).

4. Install the swing-out window latch to the door, if equipped. Refer to Swing Out Window Replacement .