Removal Procedure
- Disconnect the engine wiring harness electrical connector (1) from the mass air flow (MAF)/intake air temperature
(IAT) sensor.
 
- Remove the air cleaner outlet duct. Refer to 
Air Cleaner Outlet Duct Replacement
 .
 
- Grasp the air cleaner assembly and pull up on the assembly in order to disengage the retaining pins from the grommets.
 
Installation Procedure
- Line up the retaining pins with the grommets.
 
- Install the air cleaner assembly until the air cleaner is seated fully on the mounts and is up against the fender apron.
 
- Install the air cleaner outlet duct. Refer to 
Air Cleaner Outlet Duct Replacement
 .
 
- Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.