Preliminary Procedure

Open the hood in order to access and remove the wiper arm assembly.

1

Windshield Washer Arm Finish Cap

Tip
Use a small flat-bladed tool to remove the finish cap.

2

Windshield Washer Arm Nut

Caution: Refer to Fastener Caution in the Preface section.

Tip
Hold the wiper blade to the vertical black bar target mark located at the lower center portion of the windshield.

Tighten
30 N·m (22 lb ft)

3

Windshield Washer Arm Hose

Tip
Rotate the hose clockwise around the end of the washer wiper arm upon installation.

4

Windshield Washer Arm Assembly

Tip
Use the J 39637 .

Special Tools

J 39637 Wiper Arm Puller

5

Windshield Washer Blade Assembly

Tip
Pinch the 2 outer tabs on the arm, rotate the blade rearward and slide the blade forward to release the wiper blade from the wiper arm assembly.