1

Control Solenoid (w/Body and TCM) Valve Assembly

Procedure:

Disconnect the wiring harness.

2

Shift Shaft Position Switch

Procedure:

Disconnect the wiring harness.

3

A/Trans Wiring Harness Assembly

Procedure:

Disconnect the wiring harness.

4

Control Valve Upper Body Bolt M6 x1.0 x 65 (Qty: 4)

Tip
Do not remove all the bolts in the control valve body assembly. Remove only the bolts indicated.

5

Control Valve Upper Body Bolt M6 x 1.0 x 80 (Qty: 2)

6

Control (w/Body and Valve) Valve Assembly

Caution: Use care when handling the control valve body assembly. If dropped, damage to the control solenoid valve body assembly internal components, including the transmission control module (TCM), may result.

7

A/Trans Fluid Pump Seal Assembly

Tip
Do not reuse the seal assembly.

8

Hybrid Low, 1-2 Clutch Regulator Valve Seal (Qty: 6)

Tip
Do not reuse the seal assembly.