Sunroof Air Deflector Replacement Extended Cab
                    
Removal Procedure
- Open the power sunroof window to the fully rear position.
 
- Remove the actuators screws (1) and actuators (2) from each side of the sunroof module.
 
- Remove the screws (1) attaching the sunroof air deflector (2) to the sunroof module (3).
 
- Slide the air deflector rearward until it releases from the sunroof module.
 
- Remove the sunroof air deflector (2) from the sunroof module (3).
 
Installation Procedure
Note: Transfer the air deflector parts to the new air deflector.
- Position the sunroof air deflector (2) to the sunroof module (3).
 
Caution: Refer to Fastener Caution in the Preface section.
- Install the screws (1) attaching the sunroof air deflector (2) to the sunroof module (3).
 
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the actuators screws (1) and actuators (2) to each side sunroof module.
 
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Verify that the spring action of the sunroof air deflector is operating.
 
- Close the sunroof window.
 
                            Sunroof Air Deflector Replacement Crew Cab
                    
Callout 
 | Component Name 
 | 
Preliminary ProcedureRemove the garnish molding. Refer to 
Sunroof Panel/Window Garnish Molding Replacement. 
 | 
1 
 | Sunroof Air Deflector (Qty: 4) 
Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. 
 Procedure
- Open the sunroof to expose the 2 rivets located on each side.
 
- Tape off the under side of the sunroof track when drilling to prevent debris from entering the track.
 
- Drill out the rivets.
 
 
 | 
2 
 | Sunroof Air Deflector 
ProcedureBefore cycling the sunroof, vacuum out the sunroof track to remove all debris. 
 |