Suction Hose Replacement LY2, LMF, L76 and L92
                    
                            Suction Hose Replacement LMM
                    Special Tools
J 39400-A  Halogen Leak Detector
Removal Procedure
- Recover the refrigerant. Refer to 
Refrigerant Recovery and Recharging.
 
- Remove the suction hose mounting bolt (3) from the A/C compressor. 
 
Discard the bolt.
- Remove the suction hose (1) from the compressor.
 
- Remove the suction hose nut from the accumulator.
 
Discard the nut.
- Remove the suction hose from the accumulator.
 
- Remove the suction hose from the vehicle. 
 
- Discard all of the used sealing washers. Cap the system openings.
 
Installation Procedure
- Install the suction hose to the vehicle using new sealing washers.
 
- Install the suction hose to the accumulator.
 
Caution: Refer to Fastener Caution in the Preface section.
- Install the NEW suction hose nut to the accumulator.
 
Tighten
Tighten the nut to 16 N·m (12 lb ft).
- Install the suction hose to the compressor (1).
 
- Install the NEW suction hose mounting bolt (3).
 
Tighten
Tighten the bolt to 16 N·m (12 lb ft).
- Evacuate and recharge the A/C system. Refer to 
Refrigerant Recovery and Recharging.
 
- Leak test the fittings of the component using the 
J 39400-A .