Removal Procedure
- Remove the ECU bracket.
 
- Remove the fuel pipe retaining bolt (6).
 
- Remove the pipe retaining clips (7).
 
- Disengage the common fuel rail fuel pipe fittings.
 
- Remove the common fuel rail fuel pipe (5).
 
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Position the common fuel rail fuel pipe (5) 
 
Tighten
Tighten the common fuel rail fuel pipe fittings to 44 N·m (32 lb ft).
- Install the fuel pipe clips (7) to the common fuel rail fuel pipe (1).
 
- Install the fuel supply pipe retaining bolt (6).
 
Tighten
Tighten the common fuel rail fuel pipe retaining bolt to 9 N·m (80 lb in).
- Install the ECU bracket.
 
- Start the engine, and confirm fuel is not leaking from the connections.