Remove the following components from the bumper bracket (3):
| • | The nut (1) | 
| • | The washer (2) | 
| • | The bumper bolt (5) | 
| • | The bumper (4) | 
Notice: Refer to Fastener Notice in the Preface section.
Install the following components to the bumper bracket (3):
| • | The bumper (4) | 
| • | The bumper bolt (5) | 
| • | The washer (2) | 
| • | The nut (1) | 
Tighten
Tighten the bumper nut to 50 N·m (37 lb ft).