Removal Procedure
- Apply the parking brake.
 
- Block the wheels.
 
- Drain all the reservoirs. Refer to 
Air Brake Reservoir Draining
 .
 
- Remove the reservoir drain valve.
 
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
-  Install the reservoir drain valve, manual type.
 
Tighten
Tighten the reservoir drain valve to 50 N·m (37 lb ft).
- Start the engine.
 
- Charge the system air to the governor cut-out pressure.
 
- Inspect for leaks with a soap and water solution around the reservoir drain valve. Leakage is not permissible.
 
- Remove the wheel blocks.