Removal Procedure
- Apply the parking brake.
 
- Block the wheels.
 
- Drain all the reservoirs. Refer to 
Air Brake Reservoir Draining
 .
 
- Remove the trailer air brake service and the emergency coupling hose at the trailer air brake hose bracket
gladhand.
 
- Remove the trailer air brake air brake coupling hose bracket gladhand.
 
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the trailer air brake service coupling hose.
 
Tighten
Tighten the trailer air brake coupling hose bracket gladhand bolts to 12 N·m (106 lb in).
- Install the trailer air brake emergency brake coupling hose.
 
- Start the engine.
 
- Charge the system air pressure to the governor cut-out point.
 
- Check for leaks with a soap solution.
 
Leakage is not permissible.
- Remove the wheel blocks.