Removal Procedure
- Support the transfer case with a suitable jack.
 
- Remove the transfer case crossmember mount nut.
 
- Remove the transfer case crossmember mount bolt and washer.
 
- Remove the transfer case crossmember mount .
 
Installation Procedure
- Install the transfer case crossmember mount .
 
- Install the transfer case crossmember mount bolt and washer.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the transfer case crossmember mount nut.
 
Tighten
Tighten the nut to 125 N·m (92 lb ft).
- Remove the support from the vehicle.