Removal Procedure
- Remove the I/P carrier. Refer to 
Instrument Panel Carrier Replacement.
 
- Remove the vacuum harness (2) from the HVAC control assembly.
 
- Remove the vacuum harness (1,2) from the heater assembly. 
 
- Disconnect the vacuum hose (1) from the vacuum pump assembly.
 
- Remove the vacuum harness grommet (2) from the cowl.
 
- Remove the vacuum harness.
 
Installation Procedure
- Install the vacuum hose harness.
 
- Install the vacuum harness grommet (2) to the cowl.
 
- Connect the vacuum hose (1) to the vacuum pump assembly.
 
- Install the vacuum hose harness (1) to the heater assembly. 
 
- Install the I/P carrier. Refer to 
Instrument Panel Carrier Replacement.
 
- Install the vacuum harness (2) to the HVAC control assembly.
 
- Connect the vacuum hose (1) to the vacuum pump assembly.