Removal Procedure
- Remove the intake air
resonator. Refer to 
Intake Air Resonator Replacement
.
 
- Disconnect the mass air flow/intake air temperature (MAF/IAT)
sensor electrical connector (3).
 
- Loosen the air cleaner housing cover screws.
 
- Remove the air cleaner housing cover.
 
- Remove the air filter element.
 
- Inspect the air filter element for the following:
 
- Clean or replace the air filter element as required.
 
Installation Procedure
- Install the air filter element.
 
- Install the air cleaner housing cover.
 
- Tighten the air cleaner housing cover screws until snug.
 
- Connect the MAF/IAT sensor
electrical connector (3).
 
- Install the intake air resonator. Refer to 
Intake Air Resonator Replacement
.