For 1990-2009 cars only
- Remove the fuel rail stop bracket and bolt, as required.
- Remove the evaporative emission (EVAP) canister purge solenoid valve (730) and tubes (729, 735).
- Remove the fuel rail bolts (511).
- Remove the fuel rail (510) with injectors. Lift evenly on both sides of the fuel rail until all the injectors have left their bores.
- Remove the fuel injector retainers (521) and fuel injectors (533), as required.
- Remove the O-rings (532, 534) from the injectors, as required.
Warning: Refer to Fuel Rail Stop Bracket Installation Warning in the Preface section.
Note: The intake manifold, throttle body, fuel injection rail and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the intake manifold as a complete assembly.
Note:
• Do not separate the fuel injectors from the fuel rail, unless component service is required. • Use cleanliness and care when handling the fuel system components. • Do not allow dirt or debris to enter the fuel injectors or fuel rail components. Cap ends, as necessary.
