Preliminary Procedure

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
2. Remove the front seat adjuster outer finish cover. Refer to Front Seat Cushion Outer Trim Panel Replacement .
3. Remove the front seat adjuster outer finish cover. Refer to Front Seat Cushion Inner Trim Panel Replacement .
4. Remove the front seat riser rear finish cover by pulling rearward.

1

Front Seat Cushion Cover and Pad

Procedure

1. Disengage the j-channel retainers from the seat cushion frame.
2. Disconnect the electrical connector, if equipped.
3. Remove the seat cushion cover and pad from the seat cushion frame as an assembly.

2

Front Seat Cushion Pad

Procedure

If working on the passenger seat, re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .

3

Front Seat Cushion Heater (If Equipped)