Preliminary Procedures

1. Remove the front seat. Refer to Front Seat Replacement - Bucket.
2. Remove the front seat adjuster outer finish cover. Refer to Front Seat Cushion Outer Trim Panel Replacement.
3. Remove the front seat adjuster inner finish cover. Refer to Front Seat Cushion Inner Trim Panel Replacement.
4. Remove the front seat riser rear finish cover by pulling rearward.

1

Front Seat Cushion Cover and Pad

Procedure

1. Disengage the J-channel retainers from the seat cushion frame.
2. Disconnect the electrical connector, if equipped.
3. Remove the seat cushion cover and pad from the seat cushion frame as an assembly.

2

Front Seat Cushion Pad

Procedure

If working on the passenger seat, re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References.

3

Front Seat Cushion Heater (If Equipped)