Preliminary Procedure

Remove the instrument panel center trim panel. Refer to Instrument Panel Center Trim Panel Replacement.

1

Radio Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Radio Assembly

Procedure

1. Disconnect the electrical connector.
2. Disconnect the antenna cable.
3. Reprogram the radio after replacement. Refer to Control Module References.

Tip
When installing the radio verify that the locator pin on the back of the radio is firmly seated in the I/P structure extension.