GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 VE Ute 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Power Mirror Switch Replacement

Removal Procedure

    Object Number: 2008474 Size: SH

    Important: The front floor console front cover (1) is retained by clips.

    Important: Grasp the front floor console front cover (1) at (a) and pull upwards to disengage the retaining clips from the floor console (2).

  1. Remove the front floor console cover (1) from the front floor console (2).

    2. Object Number: 1939970 Size: SH
  2. Disconnect the window and exterior mirror switch electrical connectors (2).
  3. Disconnect the ESP and power switch assembly electrical connector (3).
  4. Remove the front floor console front cover (1).

    5. Object Number: 1939968 Size: SH

    Important: Remove the power window/mirror switch (2) by releasing from the retaining clips (3) on the front floor console cover (1).

  5. Remove the power window/mirror switch (2) from the front floor console front cover (1).

Installation Procedure

    Object Number: 1939968 Size: SH

    Important: Install the power window/mirror switch (2) by attaching the retaining clips (3) on the front floor console cover (1).

  1. Install the power window/mirror switch (2) to the front floor console front cover (1).

    2. Object Number: 1939970 Size: SH
  2. Connect the window and exterior mirror switch electrical connectors (2).
  3. Connect the ESP and Power switch electrical connector (3).

    4. Object Number: 2008474 Size: SH

    Important: The front floor console front cover (1) is retained by clips.

    Important: Install the front floor console front cover (1) and push downwards at (a) to engage the retaining clips to the floor console (2).

  4. Install the front floor console front cover (1) to the front floor console (2).