SIR Service Precautions LHD
                    
General Service Instructions
Caution: When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling and Enabling .
Failure to observe the correct procedure could cause deployment of the SIR components, personal injury, or unnecessary SIR system repairs.
Important: The sensing and diagnostic module (SDM) maintains
a reserved energy supply. The reserved energy supply provides deployment power for
the SIR modules. Deployment power may be available for up to 2 minutes after
disconnecting the vehicle power. Disabling the SIR system prevents deployment of the
SIR modules from the reserved energy supply.
Important: The following are general service instructions
which must be followed in order to properly repair the vehicle and return it to its
original integrity:
|     •  | Do not expose inflator modules to temperatures above 65 °C 
(147 °F) | 
 
|     •  | Verify the correct replacement part number. Do not substitute a component
from a different vehicle | 
 
|     •  | Use only original Holden replacement parts available from your authorized
Holden dealer. Do not use salvaged parts for repairs to the SIR system | 
 
Important: Discard any of the following components if
it has been dropped from a height of 96 cm (3 ft) or greater:
|     •  | Inflatable restraint SDM | 
 
|     •  | Inflatable restraint instrument panel (I/P) module | 
 
|     •  | Inflatable restraint steering wheel module | 
 
|     •  | Inflatable restraint steering wheel module clock-spring coil | 
 
|     •  | Inflatable restraint roof side rail modules | 
 
|     •  | Inflatable restraint side impact sensors (SIS) | 
 
|     •  | Inflatable restraint seat belt pretensioners | 
 
|     •  | Electronic front sensors | 
 
|     •  | Front seat (with side impact module) | 
 
                            SIR Service Precautions RHD
                    
General Service Instructions
Caution: When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling and Enabling .
Failure to observe the correct procedure could cause deployment of the SIR components, personal injury, or unnecessary SIR system repairs.
Important: The sensing and diagnostic module (SDM) maintains
a reserved energy supply. The reserved energy supply provides deployment power for
the SIR modules. Deployment power may be available for up to 2 minutes after
disconnecting the vehicle power. Disabling the SIR system prevents deployment of the
SIR modules from the reserved energy supply.
Important: The following are general service instructions
which must be followed in order to properly repair the vehicle and return it to its
original integrity:
|     •  | Do not expose inflator modules to temperatures above 65 °C 
(147 °F) | 
 
|     •  | Verify the correct replacement part number. Do not substitute a component
from a different vehicle | 
 
|     •  | Use only original Holden replacement parts available from your authorized
Holden dealer. Do not use salvaged parts for repairs to the SIR system | 
 
Important: Discard any of the following components if
it has been dropped from a height of 96 cm (3 ft) or greater:
|     •  | Inflatable restraint SDM | 
 
|     •  | Inflatable restraint instrument panel (I/P) module | 
 
|     •  | Inflatable restraint steering wheel module | 
 
|     •  | Inflatable restraint steering wheel module clock-spring coil | 
 
|     •  | Inflatable restraint roof side rail modules | 
 
|     •  | Inflatable restraint side impact sensors (SIS) | 
 
|     •  | Inflatable restraint seat belt pretensioners | 
 
|     •  | Electronic front sensors | 
 
|     •  | Front seat (with side impact module) |