Tools Required
J 25300-D Headlight Aimer
| • | The headlamps are aimed vertically and horizontally by adjusting
the two screws that move the mounting bracket against the tension of the coil
spring. |
| • | The adjusting screws (1, 2) are located in the headlamp bezel
area. |
| • | One screw is above the headlamp and the other screw is on the
right side of the headlamp. |
| • | The screw (1) directly above the headlamp adjusts the vertical
position. |
| • | The screw (2) to the right of the headlamp adjusts the horizontal
position. |
| • | Using the J 25300-D
, adjust the headlamps to the specifications required by the state
and/or local authorities. Follow the manufacturer's instructions for
tool use. |
