Use a multi-purpose powered cleaner for cleaning fabric trim
and for cleaning panel sections where small cleaning rings may
be left from spot cleaning.
| • | Vacuum and brush the area in order to remove any loose dirt surrounding
the trim along stitch or welt lines. |
| • | Clean the complete trim panel one section at a time. |
| • | When mixing the cleaner, follow the directions on the container
label. |
| • | Use suds on a clean sponge. |
| • | Do not saturate the material or rub the material harshly. |
| • | Wipe off any remaining residue using a slightly damp absorbent
towel or cloth. |
| • | You may use a heat dryer or heat lamp to dry the area. Use caution
with a heat dryer or lamp to prevent fabric damage. |
