Removal Procedure
- Turn OFF the headlamp switch.
- Remove the tail lamp lens
from the lens housing as follows:
| 2.1. | Roll back the rubber housing boot. |
| 2.2. | Pull the lens from the lamp housing. |
- Remove the tail lamp bulb
as follows:
| 3.1. | Press the bulb into the socket. |
| 3.2. | Turn the bulb to the left. |
Installation Procedure
- Install the tail lamp
bulb as follows:
| 1.1. | Press the bulb into the socket. |
| 1.2. | Turn the bulb to the right. |
- Install the tail lamp
lens into the rubber housing boot. Make sure that the lens is fully seated.