Backfire
Checks
| Actions
|
Definition:
Fuel ignites in the intake manifold, or in the exhaust system, making loud
popping noise.
|
Preliminary Checks
|
| • | Search for service bulletins. |
|
Fuel System
|
| • | Check for contaminated fuel. Refer to Alcohol/Contaminants-in-Fuel Diagnosis
. |
|
Ignition System
|
| • | Check for proper ignition voltage output with the spark plug jumper
wires J 36012-A
and spark tester J 26792
. |
| • | Check the spark plugs for the following conditions: |
| - | Wet or fuel fouled spark plugs |
| - | Cracks on the spark plugs |
| - | Improper spark plug gap |
| - | Burned electrodes or heavy deposits |
| • | If the spark plugs are fuel or oil fouled, the cause of the fouling
must be determined before replacing the spark plugs. |
| • | Check the ignition control module (ICM) for proper ground connection. |
| • | Check the ignition coils for cracks or carbon tracking. |
|
Engine Mechanical
|
| • | Check engine mechanical: |
| - | Sticking or leaking valves. |
| - | Excessive oil in combustion chamber-Leaking valve seals. |
| - | Low cylinder compression. |
| • | For incorrect basic engine parts. Inspect the following: |
| • | Refer to Base Engine Misfire Diagnosis
in Engine
Mechanical. |
|
Additional Checks
|
| • | Check the exhaust system for possible restriction. Check the following: |
| - | Inspect exhaust system for damaged or collapsed pipes. |
| - | Inspect mufflers for heat distress or possible internal failure. |
|