Revised Sunroof Motor/Actuator Initialization/Teach Process (New Motor)

This bulletin is being issued to revise Step 3 of the Sunroof Motor/Actuator Initialization/Teach Process (New Motor) procedure in the Roof sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

Step 3 should read "Within 6 seconds, press and hold the switch in the close position. After an additional 3 seconds, the sunroof window will move toward the open position."