Did you perform the Power Door Locks System Check?

--

Go to Step 2

Go to Power Door Locks System Check

1. Disconnect the body control module (MALL) connector C2.
2. Use a J 39200 digital multimeter (DMM) in order to measure the resistance between the following inoperative front door lock/window switch terminals and ground:

•	The left front door lock/window switch terminal K (ORN/BLK).

•	The right front door lock/window switch terminal R (ORN/BLK).

3. Press the inoperative door lock/window switch to the LOCK position.

Is the resistance within the specified range?

0 ohms

Go to Step 3

Go to Step 4

Repair an open in CKT 781 (ORN/BLK). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Power Door Locks System Check

--

Replace the inoperative front door lock/window switch. Refer to Door Lock and Side Window Switch Replacement .

Did you complete the repair?

--

Go to Power Door Locks System Check

--

Did you perform the Power Door Locks System Check?

--

Go to Step 2

Go to Power Door Locks System Check

1. Disconnect the body control module (MALL) connector C2.
2. Connect a J 39200 digital multimeter (DMM) between the MALL connector C2 terminal S (ORN/BLK) and ground.
3. Press the inoperative seat/lock switch to the UNLOCK position.

Is the resistance within the specified range while the switch is pressed?

0-5 ohms

Go to Step 3

Go to Step 4

Repair an open in CKT 781 (ORN/BLK). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Power Door Locks System Check

--

Replace the inoperative seat/lock switch. Refer to Power Seat Switch Replacement in Seats.

Did you complete the repair?

--

Go to Power Door Locks System Check

--