Headlamp Bulb Replacement Oldsmobile
Removal Procedure
| • | For the Low Beam (Right Side), perform the following steps: |
| 1. | Remove the MaxiFuse center cover. |
| 2. | Remove the low beam socket from the headlamp by entering through
the engine compartment behind the upper tie bar. |
| 3. | Turn the socket counterclockwise in order to remove the socket. |
| 4. | Disconnect the connector (1) from the bulb. |
| • | For the Low Beam (Left Side), perform the following steps: |
| 1. | Remove the air cleaner. |
| 2. | Remove the low beam socket from the headlamp by entering through
the engine compartment behind the upper tie bar. |
| 3. | Turn the socket counterclockwise in order to remove the socket. |
| 4. | Disconnect the connector (1) from the bulb. |
| • | For the High Beam (Both Sides), perform the following steps: |
| 1. | Remove the sockets by reaching through the opening at the top
of the headlamp assembly. |
| 2. | Turn the sockets counterclockwise in order to remove the socket. |
Installation Procedure
| • | For the Low Beam (Right Side), perform the following steps: |
| 1. | Connect the connector (1) to the bulb. |
| 2. | Turn the socket clockwise in in order to install the socket. |
| 3. | Install the low beam socket into the headlamp by entering through
the engine compartment behind the upper tie bar. |
| 4. | Install the MaxiFuse center cover. |
| • | For the Low Beam (Left Side), perform the following steps: |
| 1. | Connect the connector (1) to the bulb. |
| 2. | Turn the socket clockwise in order to install the socket. |
| 3. | Install the low beam socket to the headlamp by entering through
the engine compartment behind the upper tie bar. |
| 4. | Install the air cleaner. |
| • | For the High Beam (Both Sides), perform the following steps: |
| 1. | Install the sockets by reaching through the opening at the top
of the headlamp assembly. |
| 2. | Turn the sockets clockwise. |
Headlamp Bulb Replacement Buick
Removal Procedure
| • | For the Low Beam (Right Side), perform the following steps: |
| 1. | Remove the low beam socket from the headlamp by entering through
the engine compartment behind the upper tie bar. |
| 2. | Turn the socket counterclockwise in order to remove the socket. |
| 3. | Disconnect the connector (1) from the bulb. |
| • | For the Low Beam (Left Side), perform the following steps: |
| 1. | Remove the air cleaner. |
| 2. | Remove the low beam socket from the headlamp by entering through
the engine compartment behind the upper tie bar. |
| 3. | Turn the socket counterclockwise in order to remove the socket. |
| 4. | Disconnect the connector (1) from the bulb. |
| • | For the High Beam (Both Sides), perform the following steps: |
| 1. | Remove the 2 headlamp mounting bolts (2) at the
inboard edge of the headlamp in order to allow access to the high beam sockets. |
| 2. | Remove the sockets by reaching through the opening at the top
of the headlamp assembly. |
| 3. | Turn the sockets counterclockwise. |
Installation Procedure
| • | For the Low Beam (Right Side), perform the following steps: |
| 1. | Connect the connector (1) to the bulb. |
| 2. | Turn the socket clockwise in order to install the socket. |
| 3. | Install the low beam socket into the headlamp by entering through
the engine compartment behind the upper tie bar. |
| • | For the Low Beam (Left Side), perform the following steps: |
| 1. | Connect the connector (1) to the bulb. |
| 2. | Turn the socket clockwise in order to install the socket. |
| 3. | Install the low beam socket to the headlamp by entering through
the engine compartment behind the upper tie bar. |
| 4. | Install the air cleaner. |
| • | For the High Beam (Both Sides), perform the following steps: |
| 1. | Install the sockets by reaching through the opening at the top
of the headlamp assembly. |
| 2. | Turn the sockets clockwise. |
| 3. | Install the 2 headlamp mounting bolts (2) at the
inboard edge of the headlamp. |
