| Table 1: | Dash Integration Module (DIM) | 
| Table 2: | Rear Integration Module (RIM) | 
| Table 3: | Dash Integration Module (DIM) | 
| Table 4: | Rear Integration Module (RIM) | 
Scan Tool Output Control  | Additional Menu Selections  | Description  | 
|---|---|---|
A/C Orifice Relay  | --  | The scan tool displays Commanded State: None, Off or On. This function allows you to command the A/C orifice solenoid to its maximum (On) or minimum (Off) diameters.  | 
Control Power  | --  | The DIM turns ON or OFF the control power for 5 seconds.  | 
Daytime Running Lamps  | --  | The DIM actuates the DRL relay for 5 seconds when you select ON. The DRL lamps should illuminate for 5 seconds.  | 
Front Fog Lamps  | --  | The DIM actuates the front fog lamp relay for 5 seconds when you select ON. The front fog lamps should illuminate for 5 seconds.  | 
High Beam Relay  | --  | The DIM actuates the high beam lamp relay for 5 seconds when you select ON. The high beam lamps should illuminate for 5 seconds. The OFF command will not effect the relay if headlamps are on.  | 
Horn Relay  | --  | The DIM actuates the horn relay when you select ON. The horn should sound for 5 seconds.  | 
Incandescent Dimming  | --  | The DIM activates the incandescent backlighting lamps when you select ON. The incandescent backlighting lamps should illuminate for 5 seconds.  | 
Low Beam Relay  | --  | The DIM actuates the low beam relay when you select On. The low beam lamps should illuminate for 5 seconds. The OFF command will not effect the relay if headlamps are on.  | 
Parking Lamps Relay  | --  | The DIM actuates the park lamp relay when you select On. The park lamps should illuminate for 5 seconds. The OFF command will not effect the relay if headlamps are on.  | 
Reverse Lockout  | --  | The DIM actuates the reverse lockout relay for 5 seconds when you select enable. You will not be able to shift the transaxle from drive to reverse for 5 seconds.  | 
Scan Tool Output Control  | Additional Menu Selections  | Description  | 
|---|---|---|
ALC Compressor Relay  | --  | The RIM actuates, first the exhaust solenoid and then the compressor for 5 seconds when you select On. This prevents excessive residual over-pressure in the ALC system upon compressor engagement.  | 
ALC Exhaust Solenoid  | --  | The RIM actuates the exhaust solenoid for 5 seconds when you select On. The rear suspension should vent slightly.  | 
Brake To Shift Relay  | --  | The RIM deactivates the brake to shift relay for 5 seconds when you select Off. You will be able to shift the transaxle out of park without depressing the brake pedal for 5 seconds.  | 
Cigar Lighter  | --  | The RIM actuates the cigar lighter relay for 5 seconds when you select On. The cigar light should have voltage applied for 5 seconds.  | 
Courtesy Lamp #1, #2 w/dim  | --  | The RIM activates the courtesy lamps for 5 seconds when you select ON. The courtesy lamps should illuminate for 5 seconds. The courtesy lamps will turn off through the theater dimming feature if you select OFF before the 5 second period has elapsed.  | 
Courtesy Lamp #1, #2 w/o dim  | --  | The RIM activates the courtesy lamps for 5 seconds when you select ON. The courtesy lamps should illuminate for 5 seconds. The courtesy lamps will turn off immediately if you select OFF before the 5 second period has elapsed.  | 
Fuel Door Release Relay  | --  | The RIM actuates the fuel door release actuator when you select ON. The fuel door should open.  | 
Heated Seat Inhibit  | --  | The RIM signals the heated seat module to disable the heated seat function when you select ON. The heated seat module should disable the heated seats.  | 
Heated Seats Load Shed 1  | --  | The RIM enable heated seats load shed level 1 for 5 seconds when you select On. The heated seats should cycle for 5 seconds  | 
Heated Seats Load Shed 2  | --  | The RIM enable heated seats load shed level 2 for 5 seconds when you select On. The heated seats should turn off for 5 seconds  | 
Inadvertent Power Relay  | --  | The RIM actuates the inadvertent power relay for 5 seconds when you select On.  | 
Non-overhead Courtesy Lamp  | --  | The RIM actuates the non-overhead (foot well) courtesy lamp relay for 5 seconds when you select On. The non-overhead (foot well) courtesy lamps should illuminate for 5 seconds.  | 
RAP Relay  | --  | The RIM actuates the RAP relay for 5 seconds when you select On. The RAP relay controlled components should operate for 5 seconds.  | 
Rear Defog Load Shed 1  | --  | The RIM commands the rear defog load shed 1 ON for 5 seconds when you select ON. The rear defogger should cycle for 5 seconds.  | 
Rear Defog Load Shed 2  | --  | The RIM commands the rear defog load shed 2 ON for 5 seconds when you select ON. The rear defogger should turn off for 5 seconds.  | 
Rear Defog Relay  | --  | The RIM actuates the RR DEFOG relay for 5 seconds when you select ON. The rear window defogger should be active for 5 seconds.  | 
Rear Fog Lamp Relay  | --  | The RIM actuates the rear fog lamp relay for 5 seconds when you select On. The rear fog lamps should illuminate for 5 seconds.  | 
Reverse Lamp Relay  | --  | The RIM actuates the reverse lamp relay for 5 seconds when you select On. The reverse lamps should illuminate for 5 seconds.  | 
Trunk Release Relay  | --  | The RIM actuates the rear compartment lid release actuator when select On. The trunk should open.  | 
Scan Tool Output Control  | Additional Menu Selections  | Description  | 
|---|---|---|
A/C Orifice Relay  | --  | The scan tool displays Commanded State: None, Off or On. This function allows you to command the A/C orifice solenoid to its maximum (On) or minimum (Off) diameters.  | 
Control Power  | --  | The DIM turns ON or OFF the control power for 5 seconds.  | 
Daytime Running Lamps  | --  | The DIM actuates the DRL relay for 5 seconds when you select ON. The DRL lamps should illuminate for 5 seconds.  | 
Front Fog Lamps  | --  | The DIM actuates the front fog lamp relay for 5 seconds when you select ON. The front fog lamps should illuminate for 5 seconds.  | 
High Beam Relay  | --  | The DIM actuates the high beam lamp relay for 5 seconds when you select ON. The high beam lamps should illuminate for 5 seconds. The OFF command will not effect the relay if headlamps are on.  | 
Horn Relay  | --  | The DIM actuates the horn relay when you select ON. The horn should sound for 5 seconds.  | 
Incandescent Dimming  | --  | The DIM activates the incandescent backlighting lamps when you select ON. The incandescent backlighting lamps should illuminate for 5 seconds.  | 
Low Beam Relay  | --  | The DIM actuates the low beam relay when you select On. The low beam lamps should illuminate for 5 seconds. The OFF command will not effect the relay if headlamps are on.  | 
Parking Lamps Relay  | --  | The DIM actuates the park lamp relay when you select On. The park lamps should illuminate for 5 seconds. The OFF command will not effect the relay if headlamps are on.  | 
Reverse Lockout  | --  | The DIM actuates the reverse lockout relay for 5 seconds when you select enable. You will not be able to shift the transaxle from drive to reverse for 5 seconds.  | 
Scan Tool Output Control  | Additional Menu Selections  | Description  | 
|---|---|---|
ALC Compressor Relay  | --  | The RIM actuates, first the exhaust solenoid and then the compressor for 5 seconds when you select On. This prevents excessive residual over-pressure in the ALC system upon compressor engagement.  | 
ALC Exhaust Solenoid  | --  | The RIM actuates the exhaust solenoid for 5 seconds when you select On. The rear suspension should vent slightly.  | 
Brake To Shift Relay  | --  | The RIM deactivates the brake to shift relay for 5 seconds when you select Off. You will be able to shift the transaxle out of park without depressing the brake pedal for 5 seconds.  | 
Cigar Lighter  | --  | The RIM actuates the cigar lighter relay for 5 seconds when you select On. The cigar light should have voltage applied for 5 seconds.  | 
Courtesy Lamp #1, #2 w/dim  | --  | The RIM activates the courtesy lamps for 5 seconds when you select ON. The courtesy lamps should illuminate for 5 seconds. The courtesy lamps will turn off through the theater dimming feature if you select OFF before the 5 second period has elapsed.  | 
Courtesy Lamp #1, #2 w/o dim  | --  | The RIM activates the courtesy lamps for 5 seconds when you select ON. The courtesy lamps should illuminate for 5 seconds. The courtesy lamps will turn off immediately if you select OFF before the 5 second period has elapsed.  | 
Fuel Door Release Relay  | --  | The RIM actuates the fuel door release actuator when you select ON. The fuel door should open.  | 
Heated Seat Inhibit  | --  | The RIM signals the heated seat module to disable the heated seat function when you select ON. The heated seat module should disable the heated seats.  | 
Heated Seats Load Shed 1  | --  | The RIM enable heated seats load shed level 1 for 5 seconds when you select On. The heated seats should cycle for 5 seconds  | 
Heated Seats Load Shed 2  | --  | The RIM enable heated seats load shed level 2 for 5 seconds when you select On. The heated seats should turn off for 5 seconds  | 
Inadvertent Power Relay  | --  | The RIM actuates the inadvertent power relay for 5 seconds when you select On.  | 
Non-overhead Courtesy Lamp  | --  | The RIM actuates the non-overhead (foot well) courtesy lamp relay for 5 seconds when you select On. The non-overhead (foot well) courtesy lamps should illuminate for 5 seconds.  | 
RAP Relay  | --  | The RIM actuates the RAP relay for 5 seconds when you select On. The RAP relay controlled components should operate for 5 seconds.  | 
Rear Defog Load Shed 1  | --  | The RIM commands the rear defog load shed 1 ON for 5 seconds when you select ON. The rear defogger should cycle for 5 seconds.  | 
Rear Defog Load Shed 2  | --  | The RIM commands the rear defog load shed 2 ON for 5 seconds when you select ON. The rear defogger should turn off for 5 seconds.  | 
Rear Defog Relay  | --  | The RIM actuates the RR DEFOG relay for 5 seconds when you select ON. The rear window defogger should be active for 5 seconds.  | 
Rear Fog Lamp Relay  | --  | The RIM actuates the rear fog lamp relay for 5 seconds when you select On. The rear fog lamps should illuminate for 5 seconds.  | 
Reverse Lamp Relay  | --  | The RIM actuates the reverse lamp relay for 5 seconds when you select On. The reverse lamps should illuminate for 5 seconds.  | 
Trunk Release Relay  | --  | The RIM actuates the rear compartment lid release actuator when select On. The trunk should open.  |