For 1990-2009 cars only
Removal Procedure
- Set the park brake and chock the wheels.
- Fully lift the retainer from the transaxle range selector cable mechanism.
- Disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin.
- Press the locking tabs inward in order to release the transaxle range selector cable from the bracket.
- Remove the left console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Left Side in Instrument Panel, Gauges and Console.
- Remove the console trim plate. Refer to Console Trim Plate Replacement in Instrument Panel, Gauges and Console.
- Disconnect the transaxle range selector cable terminal from the shift lever pin.
- Pull the lock release and remove the transaxle range selector cable (1) from the console.
- Remove the cable from the vehicle.
Installation Procedure
- Install the shift control cable to the vehicle.
- Slide the transaxle range selector cable (1) fully into the console until it snaps into place.
- Connect the transaxle range selector cable terminal to the shift lever pin.
- Install the console trim plate. Refer to Console Trim Plate Replacement in Instrument Panel, Gauges and Console.
- Install the left console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Left Side in Instrument Panel, Gauges and Console.
- Insert the transaxle range selector cable into the bracket.
- Connect the transaxle range selector cable terminal to the transaxle manual shift lever pin.
- Install the retainer to the transaxle range selector cable mechanism.
- Adjust the automatic transmission range selector cable. Refer to Range Selector Lever Cable Adjustment .
