Removal Procedure
- Place forefinger under
the lower rear edge of the switch plate.
 
- Place thumb at the upper rear end of the switch plate along the
curved surface.
 
- While pulling rearward with forefinger and holding pressure with
thumb, flex and lift the rear of the switch plate upwards.
 
- Insert a small flat bladed tool under the forward
edge of the switch plate.
 
- Gently pry the forward edge of the switch plate upwards.
 
- Lift the entire switch plate upwards to remove.
 
- Disconnect the electrical connector.
 
Installation Procedure
- Install the electrical
connectors.
 
- Slide the rear edge of the switch plate down into the slot in
the door trim panel.
 
- Snap the forward end of the switch plate down into the door trim
panel.