Rattle Noise Under Hood (Reposition Hood Prop Rod)

Some customers may comment on a slight buzz or rattle noise coming from under the hood. This noise could be mistaken for a unusual engine noise.

The hood prop rod may be making contact with the fan shroud.

Adjust the hood prop rod.

1. Support the hood.
2. Make sure the plastic prop rod pivot block is fully seated into the radiator support before making the adjustment.



3. Adjust the prop rod by bending the rod at the point of contact. Refer to the arrow in the illustration above. There should be approximately 10 mm (3/8 in) between the prop rod and the shroud.

For vehicles repaired under warranty, use: