Removal Procedure
- Remove the sunroof window. Refer to 
Sunroof Window Replacement 
.
 
- Remove the screws (1) that retain
 the water trough to the sunroof assembly.
 
- Remove the water trough from the sunroof assembly from the top of the
 vehicle.
 
Important: The sunshade must be removed from the top of the vehicle.
- Slide the sunshade forward.
 
- Flex the center of the sunshade (2)
 upward while simultaneously sliding the panel sideways to release the retaining tabs (3)
 from the track slot (1).
 
- Remove the sunshade from the top of the vehicle.
 
Installation Procedure
- Position the sunshade to the vehicle from
 the top of the vehicle.
 
- Install the retaining tabs on one side of the sunshade into the track
 slot of the sunroof.
 
- Flex the center of the sunshade (2) upwards while simultaneously
 inserting the retaining tabs (3) into the track slot (1).
 
- Ensure that the sunshade tabs are fully seated in the track slots, and
 the sunshade slides smoothly.
 
- Install the water trough to the sunroof
 from the top of the vehicle.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (1) that retain the water trough to the sunroof. 
 
Tighten
Tighten the screws to 1 N·m (9 lb in).
- Install the sunroof window. Refer to 
Sunroof Window Replacement 
.