For 1990-2009 cars only
Removal Procedure
- Remove the I/P sound insulators, as needed for access.
- Remove the lower switch, twist counterclockwise to unlock and pull out of the retainer.
- Remove the electrical connectors from the switch.
Installation Procedure
- Slide the switch (with all the connections made) into the retainer.
- Press the switch in until the switch plunger is fully depressed into the switch barrel.
- Twist the switch clockwise until the travel stop has been reached (approximately 60 degrees). With the switch fully locked, the electrical connector will face the 3 o'clock position.
