Removal Procedure
- Remove the driver's seat.
Refer to 
Seat Replacement 
.
 
- Pull the carpet back to expose the lateral accelerator switch.
 
- Disconnect the electrical connector from the lateral accelerator
switch.
 
- Remove the two screws and the lateral accelerator switch.
 
Installation Procedure
- Install the lateral accelerator switch with
two screws.
 
Tighten
Tighten the screws to 2 N·m (18 lb in)
- Connect the electrical
connector to the module.
 
- Install the carpet.
 
- Install the driver's seat. Refer to 
Seat Replacement 
.