ind always on
Step
| Action
| Value(s)
| Yes
| No
|
1
| Was the entire Brake Warning System
Check performed?
| --
|
Go to step 2
| Go
to
Brake Warning System Check
|
2
|
- Disconnect the brake fluid level switch.
- Connect a test lamp between the brake fluid level switch harness
connector terminal B and battery positive voltage.
Is the test lamp lit?
| --
|
Go to step
3
|
Go to step 6
|
3
|
- Disconnect the park brake switch.
- Disconnect the test lamp.
- Connect a test lamp between the park brake switch harness connector
terminal A and battery positive voltage.
Is the test lamp lit?
| --
|
Go to step
4
|
Go to step 7
|
4
|
- Disconnect the body control module.
- Disconnect the test lamp.
- Connect a test lamp between the body control module harness connector
C2, terminal D3 and battery positive voltage.
Is the test lamp lit?
| --
|
Go to step
5
|
Go to step 8
|
5
| Repair a short to ground in circuit 33 (TAN/WHT).
Is the repair complete?
| --
| Go to
Brake Warning System Check
| --
|
6
| Replace the brake fluid level switch.
Is the repair complete?
| --
| Go to
Brake Warning System Check
| --
|
7
| Replace the park brake switch.
Is the repair complete?
| --
| Go to
Brake Warning System Check
| --
|
8
|
- Perform the Body Control Module System Check
in Body Control Systems.
- If no problems were found, replace the
Body Control Module Replacement
.
Is the repair complete?
| --
| Go to
Brake Warning System Check
| --
|
