Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the entire Exterior Lights System Check? | -- | Go to Step 2 | |
2 | Backprobe the hazard flasher connector with a test lamp from cavity B (ORN) to ground. Does the test lamp light? | -- | Go to Step 3 | Go to Step 7 |
3 |
Do all turn lamps light but not flash? | -- | Go to Step 4 | Go to Step 5 |
4 | Replace the hazard flasher. Refer to Turn Signal and Hazard Flashers in Instrument Panel, Gauges and Console Is the repair complete? | -- | -- | |
5 | Inspect for an open in CKT 27 (BRN) between the hazard flasher and the turn/hazard switch. Refer to Testing for Continuity in Wiring Systems. Is CKT 27 OK? | -- | Go to Step 6 | Go to Step 8 |
6 | Replace the turn/hazard switch. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle in Steering Wheel and Column - Tilt. Is the repair complete? | -- | -- | |
7 | Repair the open in CKT 140 (ORN) between the IP fuse block and the hazard flasher. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
8 | Repair the open in CKT 27 (BRN) between the hazard flasher and the turn/hazard switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
