The power steering pump is a vane-type pump which provides hydraulic pressure for the system. The power steering system consists of the following components:
| • | The driveshaft | 
| • | The pump housing | 
| • | The pump ring | 
| • | The pressure plate | 
| • | The thrust plate | 
| • | The flow control valve | 
| • | The rotor | 
| • | The vanes | 
The opening at the rear of the pump housing contains the following components:
| • | The pump ring | 
| • | The pressure plate | 
| • | The thrust plate | 
| • | The rotor | 
| • | The vanes | 
| • | The end plate | 
The small opening on the side of the housing contains the following components:
| • | The pressure line fitting | 
| • | The flow control valve | 
| • | The spring | 
The flow control orifice is a component of the pressure line fitting. A pressure relief valve inside the flow control valve limits the pump pressure.