Was the headlight system check performed?

--

Go to Step 2

Go to Headlight System Check

Does flash to pass function normally in the headlight system check?

--

Go to Step 3

Go to Step 7

Does the autolamps low and high beam operate normally?

--

Go to Step 4

Go to Step 6

1. Turn the headlamp switch to the Head position and the headlamp dimmer switch to Low position.
2. Using a test lamp, backprobe between connector C201 terminal W and ground.

Is the test lamp on?

--

Go to Step 5

Go to Step 6

Repair poor connection or open in circuit 1750 between connector C201 terminal W and S283.

Is the repair complete?

--

Go to Headlight System Check

--

Replace the headlamp switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle for service procedure.

Is the repair complete?

--

Go to Headlight System Check

Repair poor connection or open in circuit 1750 between S283 and ground.

Is the repair complete?

--

Go to Headlight System Check