Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the headlight system check. performed? | -- | Go to Headlight System Check | |
2 | Does flash to pass function normally in the headlight system check? | -- | ||
3 | Replace the headlight switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle for service procedures. Is the repair complete? | -- | Go to Headlight System Check | -- |
4 |
Are the bulbs and/or connectors open? | -- | ||
5 |
Is the repair complete? | -- | Go to Headlight System Check | -- |
6 |
Is the test lamp on? | -- | ||
7 | Using a test lamp backprobe the underhood accessory wiring junction block harness connector C2 terminal E6 to ground. Is the test lamp on? | -- | ||
8 | Using a test lamp backprobe the underhood accessory wiring junction block harness connector C3 terminal E1 to ground and also terminal E2 to ground. Is the test lamp on? | -- | ||
9 | Using a test lamp backprobe connector C201 terminal K to ground. Is the test lamp on? | -- | ||
10 | Replace the underhood accessory wiring junction block. Refer to Underhood Fuse Block Replacement for service procedure. Is the repair complete? | -- | Go to Headlight System Check | -- |
11 |
Is the repair complete? | -- | Go to Headlight System Check | -- |
12 | Repair the poor connection or open in circuit 1200 of the underhood accessory wiring junction block harness connector C2 terminal E6 to Connector C201 terminal K. Is the repair complete? | -- | Go to Headlight System Check | -- |
