Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Is the test light on? | -- | Go to Step 4 | Go to Step 3 |
3 | Repair the open circuit or poor connection in CKT 243 to the wiper/washer switch. If an open is present in the wiper/washer fuse, check for a short circuit to ground in the related circuits. The related circuits depend on whether the fuse is open before or after system operation. Is the repair complete? | -- | -- | |
4 |
Is the test light on? | -- | Go to Step 7 | Go to Step 5 |
5 | Check for a poor connection at connector C203, terminal D. Also, check for an open circuit in the pigtail (CKT 243) to the wiper/washer switch. Is a poor connection or an open circuit present? | -- | Go to Step 6 | Go to Step 14 |
6 | Repair the poor connection or the open circuit in the pigtail (CKT 243). Is the repair complete? | -- | -- | |
7 |
Is the test light on? | -- | Go to Step 9 | Go to Step 8 |
8 | Repair the open circuit or the poor connection in CKT 92 between connection C203 and the wiper motor. Is the repair complete? | -- | -- | |
9 | Connect the J 35616-200 from the wiper motor connector, terminal C to terminal A. Is the test light on? | -- | Go to Step 11 | Go to Step 10 |
10 | Repair the open circuit or poor connection in ground CKT 1650. Is the repair complete? | -- | -- | |
11 | Check for a poor connection to the wiper motor. Is a poor connection present? | -- | Go to Step 13 | Go to Step 12 |
12 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Is the replacement complete? | -- | -- | |
13 | Correct the poor connection condition. Is the poor connection corrected? | -- | -- | |
14 | Replace the wiper/washer switch. Refer to Turn Signal and Multifunction Switch Assembly - Off Vehicle . Is the replacement complete? | -- | -- |
