For 1990-2009 cars only
Removal Procedure
Caution: Be careful when you handle a sensor. Do not strike or jolt a sensor.
Before applying power to a sensor:
• Remove any dirt, grease, etc. from the mounting surface. • Position the sensor horizontally on the mounting surface. • Point the arrow on the sensor toward the front of the vehicle.
Failure to follow the correct procedure could cause air bag deployment,
personal injury, or unnecessary SIR system repairs.
• Tighten all of the sensor fasteners and sensor bracket fasteners
to the specified torque value.
- Open the hood.
- Remove the hood primary latch bolts.
- Remove the hood primary latch from the front end sheet metal support.
- Disconnect the hood release cable from the hood primary latch.
Installation Procedure
- Install the hood release cable to the hood primary latch.
- Install the hood latch to the front end sheet metal support.
- Install the hood primary latch bolts.
- Close the hood.
Tighten
Tighten the hood primary latch bolts to 10 N·m (89 lb in).
