The cancel cam is worn.

Replace the cam as needed. Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle or Steering Column Tilt Head Housing - Assemble - Off Vehicle .

The detent spring exhibits one of the following conditions:

1. Adjust the spring.
2. Replace the components as needed. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

The return spring exhibits one of the following conditions:

1. Adjust the spring as needed.
2. Replace the components as needed.Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle or Steering Column Tilt Head Housing - Assemble - Off Vehicle .

The cancel spring exhibits one of the following conditions:

1. Adjust the spring as needed.
2. Replace the components as needed.Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle or Steering Column Tilt Head Housing - Assemble - Off Vehicle .

The switch mounting screws are loose.

Tighten the screws as needed. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

One of the following components is broken:

1. Repair the components as needed. Refer to
2. Replace the components as needed. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .