Step  | Action  | Yes  | No  | 
|---|---|---|---|
1  | Check for a leaking radiator. Is the radiator leaking?  | Go to Step 2  | Go to Step 3  | 
2  | Repair or install new parts as necessary. Is the repair complete?  | System OK  | --  | 
3  | Check for a leaking heater core. Is the heater core leaking?  | Go to Step 4  | Go to Step 5  | 
4  | Check for a faulty surge pressure cap. Is the cap operating properly?  | Go to Step 5  | Go to Step 2  | 
5  | Check for a leaking surge tank hoses, a cracked surge tank or a nicked surge tank neck. Refer to Radiator Surge Tank Replacement . Is the reservoir or the hose leaking?  | Go to Step 2  | Go to Step 6  | 
6  | Check for any loose or damaged hoses and connections. Are any hoses damaged or are any hose connections leaking?  | Go to Step 2  | Go to Step 7  | 
7  | Check for a cracked thermostat housing or a leaking thermostat seal. Refer to Engine Coolant Thermostat Replacement . Is the thermostat housing cracked or is there a seal leak?  | Go to Step 2  | Go to Step 8  | 
8  | Check for a cracked water pump or a leaking water pump gasket. Is the water pump cracked or is there a leaking gasket?  | Go to Step 2  | Go to Step 9  | 
9  | Check for a cracked water pump shaft seal. Is the water pump shaft seal leaking?  | Go to Step 10  | Go to Step 11  | 
10  | Replace the water pump. Refer to Water Pump Replacement . Is the repair complete?  | System OK  | Go to Step 11  | 
11  | Check for a leaking engine block coolant drain hole plug or knock sensor. Are any drain hole plugs or knock sensors leaking?  | Go to Step 2  | Go to Step 12  | 
12  | Check for any leaking cylinder head core plugs. Are the cylinder head core plugs leaking?  | Go to Step 2  | Go to Step 13  | 
13  | Check for a leaking cylinder head gaskets, vents or a cracked cylinder heads. Is the cylinder head gasket leaking or is the cylinder head cracked?  | Go to Step 2  | Go to Step 14  | 
14  | Check for a cracked throttle body or a gasket leak. Is the throttle body cracked or is there a gasket leak?  | Go to Step 2  | Go to Step 15  | 
15  | Check for a cracked cylinder block. Is the cylinder block cracked?  | Go to Step 2  | Go to Step 16  | 
16  | Check for any porous castings. Are the castings OK?  | System OK  | --  |