Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Is the test light on? | -- | Go to Step 4 | Go to Step 3 |
3 | Repair the open or poor connection in CKT 243 to the wiper/washer switch. Is the repair complete? | -- | -- | |
4 |
Is the test light on? | -- | Go to Step 7 | Go to Step 5 |
5 | Check for a poor connection at connector C201, terminal E9, or for an open in the pigtail (CKT 243) to the wiper/washer switch. Is a poor connection or an open circuit present? | -- | Go to Step 6 | Go to Step 14 |
6 | Repair the poor connection or the open in the pigtail (CKT 243). Is the repair complete? | -- | -- | |
7 |
Is the test light on? | -- | Go to Step 9 | Go to Step 8 |
8 | Repair the open or the poor connection in CKT 92 between connector C201 and the wiper motor. Is the repair complete? | -- | -- | |
9 | Connect the test light from the wiper motor connector, terminal C to terminal A. Is the test light on? | -- | Go to Step 11 | Go to Step 10 |
10 | Repair the open or poor connection in CKT 1650. Is the repair complete? | -- | -- | |
11 | Check for a poor connection to the wiper motor. Is a poor connection present? | -- | Go to Step 13 | Go to Step 12 |
12 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Is the replacement complete? | -- | -- | |
13 | Repair the poor connection to the wiper motor. Is the repair complete? | -- | -- | |
14 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the replacement complete? | -- | -- |
