Preliminary Procedure

Remove the catalytic converter. Refer to Catalytic Converter Replacement.

1

Heater Outlet Pipe Fastener (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
62 N·m (46 lb ft)

2

Heater Outlet Pipe

Tip
Do NOT remove the heater outlet pipe from the vehicle. Install a NEW O-ring.

3

Exhaust Manifold Lower Heat Shield Lower Fastener

Tighten
38 N·m (28 lb ft)

4

Exhaust Manifold Lower Heat Shield

5

Crankshaft Position Sensor Fastener

Tighten
10 N·m (89 lb in)

6

Crankshaft Position Sensor

Procedure

Disconnect the electrical connector.