Preliminary Procedure

Remove the engine shield. Refer to Engine Shield Replacement

1

Charge Air Cooler Inlet Hose

Preliminary Procedures

1. Turn the ignition OFF.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
3. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
4. Remove the engine control module from the battery tray. Refer to NEED CELL LINK.

1

Charge Air Cooler Inlet Hose Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
X N·m (X lb in)

2

Charge Air Cooler Inlet Hose Fastener

Tighten
X N·m (89 lb in)

3

Charge Air Cooler Inlet Hose