For 1990-2009 cars only
Special Tools
| • | EN-652 Flywheel Holder |
| • | EN-45059 Torque Angle Sensor Kit |
For equivalent regional tools, refer to Special Tools.
- Install the EN-652 holder (1), lock the flywheel (2) via the starter ring gear.
- Install the crankshaft balancer (1) and NEW bolt (2) with screw locking compound and tighten in 3 passes using the EN-45059 sensor kit :
Caution: Refer to Fastener Caution in the Preface section.
| 2.1. | First pass to 95 N·m (70 lb ft) |
| 2.2. | Second pass to 45 degrees |
| 2.3. | Third pass to 15 degrees |
