| Table 1: | Digital Audio Broadcast Scan Tool Parameters |
| Table 2: | Digital Audio Broadcast Detection Module Output Controls |
Parameter | Expected Value | Definition |
|---|---|---|
Operating Conditions: Ignition ON | ||
Antenna Signal Strength | Varies | The scan tool displays the Antenna Signal Strength in dBm. |
End Model Part Number | Varies | The scan tool displays the End Model Part Number. |
Base Model Part Number | Varies | The scan tool displays the Base Model Part Number. |
End Model Part Number Alpha Code | Varies | The scan tool displays the End Model Part Number Alpha Code. |
Diagnostic Data Identifier | Varies | The scan tool displays the Diagnostic Data Identifier. |
Vehicle Identification Number (VIN) | Varies | The scan tool displays the Vehicle Identification Number (VIN). |
Mechanical Key Code | Varies | The scan tool displays the Mechanical Key Code. |
Module Diagnostic Address | Varies | The scan tool displays the Module Diagnostic Address. |
Date Programmed | Varies | The scan tool displays the Date Programmed. |
Scan Tool Output Control | Description |
|---|---|
Audio Tone | This output controls a test tone (1 kHz sinus) on left and right audio channels in order to check the audio between the Digital Audio Broadcast Module and the radio. Pressing left button a tone with 1 KHz can be heard out off the left speakers. Pressing right button a tone with 1 KHz can be heard out off the right speaker. |
CAN Bus Configuration Learn | This output control will enable the module to learn the serial data speed and adapt to it. |
